Material Safety Data Sheet

Manufacturer: POR-15 Inc., P.O. Box 1235, Morristown, NJ 07962-1235 Telephone: 973-887-1999

Factory: 64 South Jefferson Road, Whippany, NJ 07981

Emergency Telephone No: 973-887-1999, 800-457-6715, 973-539-3236, Chemtrec 800-424-9300

PRODUCT NAME: METAL MASK

II. HAZARDOUS INGREDIENTS

Chemical OSHA PEL ACGIH TLV Other Exp Limits % Optional CAS NO.

Oil Mod Polyurethanes none none proprietary

Aliphatic Hydrocarbon 500 100 64741-41-9

Aluminum 15 mg/m3 10 mg/m3 7429-90-5

Manganese Oxide 5 mg/m3 5 mg/m3 1 mg/m3(91WA) 1313-13-9

Iron Oxide 10 mg/m3 5 mg/m3 1309-37-1

Silicon Dioxide 6 mg/m3 10 mg/m3 7631-86-9

Aluminum Dioxide 10 mg/m3 10 mg/m3 1344-28-1

* The last four potentially hazardous ingredients have been chemically reacted at high temp and are homogenically and ionically interdiffused to create an essentially insolubly pigment. This means that they are not present in the form of simple physical mixture.

III. PHYSICAL AND CHEMICAL CHARACTERISTICS

BOILING POINT: 350 Degrees F / 177 Degrees F MELTING POINT: N/A

REACTIVITY IN WATER: None SOLUBILITY IN WATER: Negligible

VAPOR DENSITY: Heavier than air APPEARANCE/ODOR: Gray/Specific

SPECIFIC GRAVITY (H20 = 1): 1.28

IV. FIRE & EXPLOSION DATA

FLASH POINT (Method used): TCC 104 Degrees F / 40 Degrees C AUTO IGNITION TEMP: 475 Degrees F / 246 Degrees F

EXTINGUISHING MEDIA: Foam, CO2, Dry Chemical, Sand

SPECIAL FIRE FIGHTING PROCEDURES: Use of self-contained breathing apparatus is recommended. Avoid spreading burning liquid with water for cooling purposes. USUAL FIRE OR EXPLOSION HAZARDS: Keep work areas free of hot metal surfaces and other sources of ignition. Combustible. FLAMMABLE LIMITS LEL: 0.77% FLAMMABLE LIMITS UEL: 6%

V. PHYSICAL HAZARDS (REACTIVITY DATA)

STABILITY: Stable under normal storage and usage. CONDITIONS TO AVOID: Heat, sparks, open flame & fire. INCOMPATABILITY (Materials to Avoid): Strong oxidizing agents like bleach, hydrogen peroxide. Avoid contact with zinc, magnesium, galvanized metals. HAZARDOUS DECOMPOSTITION PRODUCTS: Thermal decomp may yield carbon monoxide. HAZARDOUS POLYMERIZATION: Will not occur.

VI. HEALTH HAZARDS

Signs and symptoms of exposure: Headache, dizziness, nausea, respiratory tract irritation; may be an eye irritant and cause skin irritation. Potential carcinogens: none

FIRST AID PROCEDURES: Eyes – Flush with water. Skin – wash with mild soap & water. Inhalation – Remove to fresh air and call physician. Ingestion – Call physician.

VII. SPECIAL PRECAUTIONS AND SPILL / LEAK PROCEDURES

Keep away from heat, sparks, open flame. Use with adequate ventilation; avoid prolonged contact. OTHER PRECAUTIONS: Goggles and protective gloves are recommended. WASTE DISPOSAL: Incinerate under safe conditions or dispose of in accordance with local state and federal regulations.

VIII. SPECIAL PROTECTION INFORMATION / CONTROL MEASURES

RESPIRATORY PROTECTION: Self-contained breathing apparatus for concentration above TLV.

VENTILATION: Yes

LOCAL EXHAUST: Yes

MECHANICAL (GENERAL): Yes

EYE PROTECTION: Safety goggles.

PROTECTIVE GLOVES: Chemical resistant.

OTHER PROTECTIVE CLOTHING / EQUIPMENT: Eye bath and safety shower.

WORK / HYGENIC PRACTICES: Avoid ingesting this product.

REVISED 11/24/05