___
 POR-15 Canada Ltd.  15 Grand Trunk, St. Lambert (Montreal), QC, J4R 2S6  Canada Tel: 800-689-7504
--------
POR-15 - We know what PERMANENT means!

Authorized Distributor of POR-15®

POR-15® Rust Prevention Products
PRODUCT INFORMATION
Puttys & Body Fillers for Rust Repair
STOP RUST PERMANENTLY - GUARANTEED!

Email:  info@por15canada.com

Home | Return to Product Info

       

POR-15® Puttys & Body Fillers for Rust Repair

On THIS page: Epoxy Putty     Fire Seal 2000     POR Patch    RestoGrip     StraightLine

Two Great New Products from POR-15 ®
 

StraightLine™ Body Filler

STRAIGHTLINE
Body Filler
        

STRAIGHTLINE is the POR-15 companion product you have wanted for years!


Our new body fillers stick to POR-15 Rust Preventive Paint like nothing you've ever seen! They're made exclusively for POR-15 Inc. by the top body filler manufacturer in the World! We guarantee you'll say they're the best you've ever used or your money back....period! Yes they're more expensive than fillers you can buy locally, and not by just a little... but if you've used body filler before, try ours; you'll know at once you've made a great buy. If you're a first-timer, ours are the easiest to use body fillers made anywhere.

STRAIGHTLINE BODY FILLER  has over 30% more resin than other fillers, which gives it much greater adhesion.  This makes it the perfect choice to apply over POR-15 STRAIGHTLINE   has ultra fine particles for perfect feathering of edges, and is manufactured under vacuum, which eliminates those pesky air holes you've experienced with other fillers.  It's more flexible, tougher, and able to tolerate higher temperatures than other fillers (you can even use it in a bake oven!)  Use STRAIGHTLINE BODY FILLER  for steel, aluminum, galvanized steel, fiberglass, and many plastics.  Give it a try.
Check out these features: 

     *sticks to POR-15 Rust Preventive Paint like nothing you've ever seen!
     *30% more resin (other fillers are loaded with too much talc)
     *Manufactured under vacuum.... pinholes are eliminated!
     *
Much more flexible than other fillers.
     *Ultra-fine  particles means greater density for perfect feathering.
     *Ready to sand in 20 minutes or less.
     *Tolerates higher temperatures.... bake oven compatible.
     *Excellent for use with two-part or single-part paint systems.
     *Low absorption, so that paint doesn't soak into the filler; yields better paint coverage.
     *Convenient packaging; reseal able hardener keeps product fresher longer .
    *Comes with resin, hardener, and applicator.
    
*Both are more flexible than ordinary fillers.
    *Comprehensive instructions included.

 

8.45   oz. (250 ml).......$26.00
20.3   oz. (600 ml).......$41.00
36.3   oz.   (1.1 ltr).......$72.00

Size: 
Quantity:

Accessories

----------


RestoGRIP™ Body Filler

   RESTOGRIP
Body Filler
      

For tough applications, use a tough filler: RestoGRIP !


We specifically designed RestoGRIP Body Filler for applications that require more strength, such as bridging holes, or filling high-stress areas. RestoGRIP Body Filler is loaded with tiny polyester fibers, which makes it many times stronger than ordinary body fillers. Use RestoGRIP in conjunction with POR-15 ® , to make permanent repairs to rust holes or deep pits in steel or galvanized steel. Then, use STRAIGHTLINE BODY FILLER to finish off the repair, for the ultimate smooth final appearance.

Now you have the superior body fillers that you always wanted. And they were engineered for use with POR-15 ® . Try them for yourself! 

         After you've worked so hard on your car, does it make any sense to use an inferior body filler that costs a few bucks less?  Both STRAIGHTLINE ™ and RestoGRIP ™ are supplied in special tins which house the body filler in the bottom and the re-seal able hardener in an insert tray on top....no separate tubes to lose. 

 

  8.45 oz. (250 ml)........$26.00
20.3   oz. (600 ml)........$41.00
36.3   oz.    (1.1ltr)........$72.00

Size: 
Quantity:

Accessories


  FAQs

EPOXY PUTTY

'Unbelievable', that's what restorers say when they see a demonstration of this incredible EPOXY PUTTY product.

It's so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers.

And since it's WATER BASED, you can simply wet your fingers, and work with it until it is almost perfectly smooth before it dries - eliminating most sanding! But when it cures, it's ROCK HARD, making it perfect for repairing steel, plastics, concrete, etc. Amazingly, it even sticks to damp surfaces, and will cure UNDERWATER, so it can be used to fix leaking basement walls, swimming pools, plumbing fixtures and so much more. Put some EPOXY PUTTY in your toolbox today. You'll find yourself using it all over your shop and home.

 
FEATURES:
    Mixes like clay
Hardens like steel
Cures in water
Great Insulator
Easy to use
      No measuring or weighing
Stays in place, doesn't slump or sag
Malleable consistency, fill in anywhere
Can be sanded, drilled, machined, sawed & painted
Workable with bare hands

One pound pack of POR Epoxy Putty..........$30.00

Quantity:      
Accessories


          

FAQs

Tube 2-1 oz pkgs......$23.00

Quantity:      
Accessories

FIRE SEAL 2000™

For years we've been working on a product to repair cracks, pits or holes in exhaust manifolds, tailpipes, mufflers, or other components subjected to high temperatures while in use.   Because replacement parts are often difficult or impossible to find, there is a real need for this type of product in the marketplace.   FIRE SEAL 2000™ is a single-component (no mixing required) ceramic and stainless steel-filled putty that is resistant to fuels, oils, and corrosives.   After it is fully cured, it will withstand temperatures up to 2000° F.   FIRE SEAL 2000™ may be applied to rough-surfaced or sandblasted steel, stainless steel, or cast iron.

Use a putty knife, small trowel or spatula to apply.   Curing: Let FIRE SEAL 2000™ dry for 16-24 hours.   Begin final cure by idling engine for 10-15 minutes at a time.   You may sand FIRE SEAL 2000™ after it is fully cured, using a file or medium grit sandpaper.   Do not use any lubricants for machining, but always use a dust mask to avoid inhaling the sanding dust.


POR PATCH™

For years our customers have asked us for a thicker version of our world-famous POR-15 ® for filling seams or holes. Here it is! POR Patch™ is, quite literally, POR-15 ® in a tube, and like POR-15 ® it dries as hard as a rock, remains flexible, and once dry is totally impervious to fuels and solvents. It's so tough it actually adds strength to weakened metal. And it won't absorb moisture and swell like conventional body fillers. Try it yourself, it's incredible!

Available in Pearl White or Black.

4 oz tube.........$26.00

Color: 

Quantity:

      Accessories  

FAQs


CALL TOLL-FREE: 800-689-7504

Tel: 450-465-5887
Fax: 450-465-8669

MAIN OFFICE HOURS:  Mon -Fri  9-5 EST

Email:  info@por15canada.com


Home | Return to Product Info